Pressure Transducers
Miniature Series

(In six configurations)



Load Cells
Miniature Series
(In two small sizes)


Extensometers
(In four basic styles)


Transducer And Strain Indicator
    

Precision Measurement Company

Load Cells - Miniature Series


Model 4C
Compression

Click image to enlarge.

 

Model 4CT
Compression or Tension

Click image to enlarge.

Conventional load cells are normally made in a few fixed load ratings, such as 500 or 1,000 lbs. Now, due to a new proprietary design, we can tailor a small load cell to your specific load rating, and deliver maximum voltage output at that load. This gives the user freedom to specify the load range rather than accept a standard catalog value.

These load cells are compact units designed to fit and the small spaces. They are full bridge strain gage designs, and will produce approximately 4mv/v output at rated load. The compression models can be furnished with threaded studs on one end for easy attachment, while the tensions/compression models use threaded rods on both ends, so that they can serve in tension, compression or as a universal cell without changing fixtures. Dimensions are given in the sketches below.

                Compression only Models
-
2C
4C
6C
a
0.2 (5)
0.3 (7.5)
0.3 (7.5)
b
0.3 (7.5)
0.5 (12.5)
1.0 (25)
D
0.5 (12.5)
1.0 (25)
1.5 (38)
Min. Range
5
0-10
0-25
Max. Range
0-2500
0-10,000
0-15,000
Dimensions in inches (mm), Load in lbs.

                   Compression-Tension Models
-
2CT
4CT
6CT
c
0.4 (10)
0.6 (15)
0.75 (19)
e
0.5 (12.5)
0.7 (18)
1.4 (35)
Min. Range
5
0-10
0-25
Max. Range
0-1500
0-5000
0-10,000
Dimensions in inches (mm), Load in lbs.

Electrical output: 3 to 4 mv/v F.S.
Recommended excitation: Up to 5v.
Linearity and hysteresis: less than 1% F.S.
Cable: Shielded four conductor cable 6 ft. long.
           For use in compression only, specify Model 6C, 4C or 2C
           For use in tension or compression, specify Model 6CT, 4CT or 2CT

When ordering, specify maximum load desired.


Telephone & Fax: (734) 995-0041
Email us at:
info@pmctransducers.com